The Wraparound Pegs are engineered to improve the grinding experience and the life of the product.
 
The Wraparound Pegs feature an engineered interface between the fork and peg, extending beneath the dropout. This reduces bending and shear stresses on the axle, changes them to compression and transferring them to the fork and peg in a far stronger arrangement.
 
Due to the way the peg and fork interact, there is no facility to rotate the pegs. To counteract this, the material on the grinding surface is a larger diameter and significantly thicker than that on the top face. This also allows the material which would have usually been above the contact to be removed entirely, as it is not used and not needed.
 
As the pegs are locked in position by the fork dropout, they can be assembled with the use of a single tool, which tightens the bolt directly into a thread cut into one of the pegs. 
 
This version of the Wraparound Pegs are manufactured from high tensile 4140 Chromoly steel and feature a Manganese Phosphate surface finish, which increases the hardness, lowers the coefficient of friction and binds better to waxes for better grinding.
 
This product will be slightly oily when new. The oil can be wiped off and is only there to soak into the pores of the material coating to protect it long term.
 
Please note that due to the highly optimised geometry of this product, it is only compatible with the Riderdesigned Ceremonial Fork at this time.
 
Please also note that the Silver edition of this product does not feature the Manganese Phosphate coating but will still work perfectly as intended.